6- Bear tea light candle holder, decorative series

                                   DO NOT USE REAL CANDLES

CANDLE HOLDER VERSION 6 

The series of candle holders continues (to find other versions visit my profile)

After the owl, fox, squirrel, penguin and raccoon, I propose this sleeping bear version, which conveys a sense of calm. 

• Design: Sitting teddy bear figurine with detailed "plush" texture

• Use: The circular opening on the belly allows a candle to be inserted, creating a soft light effect that illuminates the figure from within. Ideal as an ornament, night light for children or a personalized gift. This type of object is often used as a decorative element or as a party favor for special events such as births or baptisms. Thanks to its minimalist design and matte finish, it adapts well to modern environments and creates a warm atmosphere when the candle is lit

These objects are designed to hold a small tealight candle, a LED Flame Tea Light Candle from Bambulab or similar (D37.2x36.6mm), which illuminates the central cavity, creating a warm and inviting atmosphere. 

Colors and dimensions can be changed in the slicer at the time of printing. Supports detach very easily.

I used Bambulab Jade White filament. 

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small measures, along with many others, determine the success of a good print.

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me; we will find solutions together in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, damp or poor quality filaments, do not blame me.

Happy printing everyone!

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm

• Initial layer height 0.2 mm

• Wall loops 2

• Top shell layers 5

• Bottom shell layers 3

• Infill 10%

• Grid pattern

• Supports yes

• Outer wall speed 200 mm/s

• Inner wall speed 300 mm/s

• Normal print acceleration speed 8000 mm/s

• Outer wall acceleration speed 8000 mm/s