Print Profile(2)
Description
Summary
This project is designed to germinate Chia seeds, although other small seeds can also be used.
The seeds must first be activated by placing them in a container with water that barely covers them for several minutes. A gelatinous substance will be generated.
Then they should be spread on the upper part of the grid, taking care that they are not very overlapping. The grid is placed in the container with water to the bottom of it and is kept covered for the first 2 days to generate a greenhouse effect. From the second day it is left uncovered, taking care to maintain the water level to the bottom of the grid. A spray can be used to moisten the sprouts a couple of times a day, but in my case it was not necessary.
Although Chia sprouts can be consumed as food, we recommend that in this case the impression be made with filaments approved for this purpose.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
10
Filament: GST3D PLA
Notes:
This model is specifically designed to use 0.4 nozzle and 0.2 layer height. These parameters are essential to optimize printing.
Comment & Rating (17)