EEZO 3D

cover

tintin-e-milu-2.png

tintin-e-milu-1.png

tintin-e-milu.jpg

tintim e milu

plate_1.png

milu

plate_2.png

bases

plate_3.png

fundo

plate_4.png

fundo com sombra

plate_5.png

tintim

plate_6.png

605fc768859f7a82.png

Captura de tela 2026-04-21 183123.png

<h3>🎨 How to print 6 colors using an AMS Lite (4 slots)</h3>This model features 6 detailed colors on the first layer to ensure an amazing look. If you have an AMS Lite (which only holds 4 spools at a time), don&#39;t worry! It is completely possible to print this profile using the &#34;Manual Swap&#34; (or hot swap) technique.Follow this simple step-by-step guide when sending the file to the printer:1. Physical Setup on the AMS Lite Load the first 4 colors the printer will ask for into the slots:<ul><li>Slot A1: Black</li><li>Slot A2: Red</li><li>Slot A3: Beige</li><li>Slot A4: Yellow</li><li>(Keep the White and Blue spools set aside next to the machine).</li></ul>2. Send Screen Configuration (Bambu Studio) When you click &#34;Print Plate&#34;, you will need to &#34;trick&#34; the system by assigning the extra filaments to the slots that will finish their job first:<ul><li>Assign the White color to slot A1 (the same as Black).</li><li>Assign the Blue color to slot A2 (the same as Red).</li></ul>3. The &#34;Manual Swap&#34; (During the 1st Layer)<ul><li>Start the print. The machine will first print Black (A1) and then Red (A2).</li><li>As soon as it retracts the Red filament and starts printing the 3rd color (Beige - A3), that&#39;s your cue!</li><li>While the printer is busy with Beige and Yellow: remove the Black and Red spools from slots A1 and A2.</li><li>Load the White spool into slot A1 and the Blue spool into slot A2.</li><li>Done! When it&#39;s time for the 5th and 6th colors, the machine will pull White and Blue perfectly.</li></ul>4. The Rest of the Print Since the 6 colors are only on the initial face layers of the model, the rest of the body (background) will use a single solid main color.<ul><li>Attention: As soon as White and Blue finish the front details, remember to put your main background color back into its original slot (e.g., return Black to A1) so the printer can finish the remaining hours of work on its own! ------- pt-br -------  </li></ul><h3>🎨 Como imprimir 6 cores usando um AMS Lite (4 slots)</h3>Este modelo possui 6 cores detalhadas na primeira camada para garantir um visual incrível. Se você possui um AMS Lite (que comporta apenas 4 rolos por vez), não se preocupe! É totalmente possível imprimir esse perfil usando a técnica de &#34;Troca no Voo&#34; (Manual Swap).Siga este passo a passo simples na hora de enviar o arquivo para a impressora:1. Preparação Física no AMS Lite Carregue as 4 primeiras cores que a impressora vai pedir nos slots:<ul><li>Slot A1: Preto</li><li>Slot A2: Vermelho</li><li>Slot A3: Bege</li><li>Slot A4: Amarelo</li><li>(Deixe os rolos Branco e Azul separados ao lado da máquina).</li></ul>2. Configuração na Tela de Envio (Bambu Studio) Ao clicar em &#34;Imprimir Placa&#34;, você precisará &#34;enganar&#34; o sistema, atribuindo os filamentos excedentes aos slots que terminarão o trabalho primeiro:<ul><li>Aponte a cor Branca para o slot A1 (o mesmo do Preto).</li><li>Aponte a cor Azul para o slot A2 (o mesmo do Vermelho).</li></ul>3. A Troca &#34;No Voo&#34; (Durante a 1ª Camada)<ul><li>Dê o play na impressão. A máquina imprimirá primeiro o Preto (A1) e, em seguida, o Vermelho (A2).</li><li>Assim que ela recolher o fio Vermelho e começar a imprimir a 3ª cor (Bege - A3), é a sua deixa!</li><li>Aproveite que a impressora está ocupada com o Bege e o Amarelo: remova os rolos Preto e Vermelho dos slots A1 e A2.</li><li>Engate o rolo Branco no slot A1 e o rolo Azul no slot A2.</li><li>Pronto! Quando chegar a vez da 5ª e 6ª cor, a máquina puxará o Branco e o Azul perfeitamente.</li></ul>4. O Restante da Impressão Como as 6 cores estão apenas nas camadas iniciais da face do modelo, o restante do corpo (fundo) usará uma cor sólida principal.<ul><li>Atenção: Assim que o Branco e o Azul terminarem o detalhe da frente, lembre-se de recolocar a cor de fundo principal no seu respectivo slot original (ex: devolver o Preto para o A1) para que a impressora finalize as próximas horas de trabalho sozinha!</li></ul>

<h3>🎨 How to print 6 colors using an AMS Lite (4 slots)</h3>This model features 6 detailed colors on the first layer to ensure an amazing look. If you have an AMS Lite (which only holds 4 spools at a time), don&#39;t worry! It is completely possible to print this profile using the &#34;Manual Swap&#34; (or hot swap) technique.Follow this simple step-by-step guide when sending the file to the printer:1. Physical Setup on the AMS Lite Load the first 4 colors the printer will ask for into the slots:<ul><li>Slot A1: Black</li><li>Slot A2: Red</li><li>Slot A3: Beige</li><li>Slot A4: Yellow</li><li>(Keep the White and Blue spools set aside next to the machine).</li></ul>2. Send Screen Configuration (Bambu Studio) When you click &#34;Print Plate&#34;, you will need to &#34;trick&#34; the system by assigning the extra filaments to the slots that will finish their job first:<ul><li>Assign the White color to slot A1 (the same as Black).</li><li>Assign the Blue color to slot A2 (the same as Red).</li></ul>3. The &#34;Manual Swap&#34; (During the 1st Layer)<ul><li>Start the print. The machine will first print Black (A1) and then Red (A2).</li><li>As soon as it retracts the Red filament and starts printing the 3rd color (Beige - A3), that&#39;s your cue!</li><li>While the printer is busy with Beige and Yellow: remove the Black and Red spools from slots A1 and A2.</li><li>Load the White spool into slot A1 and the Blue spool into slot A2.</li><li>Done! When it&#39;s time for the 5th and 6th colors, the machine will pull White and Blue perfectly.</li></ul>4. The Rest of the Print Since the 6 colors are only on the initial face layers of the model, the rest of the body (background) will use a single solid main color.<ul><li>Attention: As soon as White and Blue finish the front details, remember to put your main background color back into its original slot (e.g., return Black to A1) so the printer can finish the remaining hours of work on its own! ------- pt-br -------  </li></ul><h3>🎨 How to print 6 colors using an AMS Lite (4 slots)</h3>This model features 6 detailed colors on the first layer to ensure an amazing look. If you have an AMS Lite (which only holds 4 spools at a time), don&#39;t worry! It is completely possible to print this profile using the &#34;Manual Swap&#34; technique.Follow this simple step-by-step guide when sending the file to the printer:1. Physical Setup on the AMS Lite Load the first 4 colors the printer will ask for into the slots:<ul><li>Slot A1: Black</li><li>Slot A2: Red</li><li>Slot A3: Beige</li><li>Slot A4: Yellow</li><li>(Keep the White and Blue spools set aside next to the machine).</li></ul>2. Send Screen Configuration (Bambu Studio) When you click &#34;Print Plate&#34;, you will need to &#34;trick&#34; the system by assigning the extra filaments to the slots that will finish their job first:<ul><li>Assign the White color to slot A1 (the same as Black).</li><li>Assign the Blue color to slot A2 (the same as Red).</li></ul>3. The &#34;Manual Swap&#34; (During the 1st Layer)<ul><li>Start the print. The machine will first print Black (A1) and then Red (A2).</li><li>As soon as it retracts the Red filament and starts printing the 3rd color (Beige - A3), that&#39;s your cue!</li><li>While the printer is busy with Beige and Yellow: remove the Black and Red spools from slots A1 and A2.</li><li>Load the White spool into slot A1 and the Blue spool into slot A2.</li><li>Done! When it&#39;s time for the 5th and 6th colors, the machine will pull White and Blue perfectly.</li></ul>4. The Rest of the Print Since the 6 colors are only on the initial face layers of the model, the rest of the body (background) will use a single solid main color.<ul><li>Attention: As soon as White and Blue finish the front details, remember to put your main background color back into its original slot (e.g., return Black to A1) so the printer can finish the remaining hours of work on its own!</li></ul>

0.2mm layer, 2 walls, 20% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

Classic Silhouette: Tintin &amp; Snowy (Milou)Bring a piece of comic history to your desk with this stylized 3D display. Inspired by the iconic &#34;running&#34; silhouette from Hergé&#39;s masterpiece, this model was designed to be a clean, high-contrast decorative piece.The model features a multi-layered design, perfect for highlighting the golden backdrop against the dark shadows of our favorite reporter and his loyal dog.<h3>Print Settings &amp; Tips:</h3><ul><li>Layer Height: 0.2mm (standard) or 0.16mm for finer detail on the characters.</li><li>Color Change: Optimized for AMS (Bambu Lab users) or manual filament swaps.</li><li>Build Plate: I recommend using a Textured PEI Plate for the golden background to get a premium, non-reflective finish.</li><li>Infill: 10-15% (Gyroïd recommended).</li><li>Top Surface Pattern: Use &#34;Monotonic Line&#34; for a smooth, professional look on the flat areas.</li></ul>A great gift for Franco-Belgian comics fans and collectors! ---------- pt-br ---------- Silhueta Clássica: Tintim e Milu (Tintin &amp; Snowy)Leve um pedaço da história dos quadrinhos para a sua mesa com este display 3D estilizado. Inspirado na icônica silhueta de corrida da obra-prima de Hergé, este modelo foi desenvolvido para ser uma peça decorativa clean e de alto contraste.O design foi estruturado em camadas para destacar o fundo dourado contra as sombras do repórter mais famoso do mundo e seu fiel companheiro, Milu.<h3>Configurações e Dicas de Impressão:</h3><ul><li>Altura de Camada: 0.2mm (padrão) ou 0.16mm para detalhes mais finos nos personagens.</li><li>Troca de Cores: Totalmente otimizado para AMS (Bambu Lab) ou trocas manuais de filamento.</li><li>Placa de Impressão: Recomendo usar a Textured PEI Plate. A textura granulada no fundo dourado dá um acabamento premium e esconde marcas de linhas.</li><li>Preenchimento (Infill): 10-15% (Giroide recomendado).</li><li>Padrão de Camada Superior: Use o padrão &#34;Linha Monotônica&#34; (Monotonic Line) para garantir que as áreas planas fiquem com um visual liso e profissional.</li></ul>Um presente perfeito para fãs de BD (Banda Desenhada), colecionadores e entusiastas da cultura pop!

Classic Silhouette: Tintin &amp; Snowy (Milou)Bring a piece of comic history to your desk with this stylized 3D display. Inspired by the iconic &#34;running&#34; silhouette from Hergé&#39;s masterpiece, this model was designed to be a clean, high-contrast decorative piece.The model features a multi-layered design, perfect for highlighting the golden backdrop against the dark shadows of our favorite reporter and his loyal dog.<h3>Print Settings &amp; Tips:</h3><ul><li>Layer Height: 0.2mm (standard) or 0.16mm for finer detail on the characters.</li><li>Color Change: Optimized for AMS (Bambu Lab users) or manual filament swaps.</li><li>Build Plate: I recommend using a Textured PEI Plate for the golden background to get a premium, non-reflective finish.</li><li>Infill: 10-15% (Gyroïd recommended).</li><li>Top Surface Pattern: Use &#34;Monotonic Line&#34; for a smooth, professional look on the flat areas.</li></ul>A great gift for Franco-Belgian comics fans and collectors! ---------- pt-br ---------- Classic Silhouette: Tintin &amp; Snowy (Tintin &amp; Snowy)Bring a piece of comic history to your desk with this stylized 3D display. Inspired by the iconic running silhouette from Hergé's masterpiece, this model was designed to be a clean, high-contrast decorative piece.The design was structured in layers to highlight the golden background against the shadows of the world's most famous reporter and his loyal companion, Snowy.<h3>Print Settings &amp; Tips:</h3><ul><li>Layer Height: 0.2mm (standard) or 0.16mm for finer detail on the characters.</li><li>Color Change: Fully optimized for AMS (Bambu Lab) or manual filament swaps.</li><li>Build Plate: I recommend using the Textured PEI Plate. The granular texture on the golden background gives a premium finish and hides line marks.</li><li>Infill: 10-15% (Gyroid recommended).</li><li>Top Surface Pattern: Use the &#34;Monotonic Line&#34; pattern to ensure flat areas have a smooth, professional look.</li></ul>A perfect gift for comic book fans, collectors, and pop culture enthusiasts!

The Adventures of Tintin: Classic Silhouette Art

ASIA

Print Profile(1)

Description

Print Settings & Tips:

Print Settings & Tips:

Comment & Rating (0)

License

Related Models