SOLDR Soldering Iron Holder with Tip Cleaner

This is a soldering iron holder for the SOLDR system with an integrated tip cleaner. It works along with the Aifen A11 soldering iron clamp file that comes in the original SOLDR 3d files. You will require 2 x M2x6 machine screws to fix the 2 halves together along with 10 x 6x3 magnets (8 for the base and 2 for the iron holder).If also printing the clamp file then you will require an additional 2 x 6x3 magnets and 2 x M2x6 countersunk machine screws for the clamp. You will also require a piece of tip cleaning foam cut to 27 by 28mm and some wire sponge.