Box for eyeglass cleaning supplies

Please switch to version 2, as this version seals too tightly and the cloth does not dry out.
Box for Glasses Cleaning Accessories V2 – Free 3D Print Model – MakerWorld



Design
Everyone knows the feeling: you need a damp cloth to clean your glasses, and it's almost always dry just when you need it. This is particularly annoying in the car, and you end up using your shirt again. That's neither good for the shirt nor for the glasses. My optician therefore recommended a small spray bottle along with a cloth. While cleaning worked great with it, the cloth constantly picked up dirt from the center console. For this reason, I designed a box that safely holds both the bottle and the cloth, protecting them from external influences. The box has also proven useful for travel, as it fits easily in a toiletry bag.

Everything you need is linked below.

Dimensions
The box is designed for bottles with dimensions of 102x30mm (30ml).
The compartment next to it fits cloths up to 200x200mm in size.

Supports: 
No supports are needed.

Printing
For storage in the car, I would recommend PETG, as it is somewhat more temperature resistant. 
Do not change the print file, as the fuzzy skin effect is applied to the outside of the box via the modifier.
I used PETG HF and PLA Basic from BambuLab – works great.
PLA or PETG from other manufacturers should also work without problems.
 

Links
Microfiber Glasses Cleaning Cloths 8X Grey - 20x20cm *: https://amzn.to/48dPSNb

4 Pieces 30ml Spray Bottle *: https://amzn.to/41NXv9o

Glasses Cleaner Refill Bottle 750ml *: https://amzn.to/4vvGNcq

Like this 3D model?

☕ Show your appreciation by buying me a coffee! 

👍 Share my creation and leave a comment below with any feedback or suggestions!

Note

All links with "*" are Amazon affiliate links. You are supporting my work at no extra cost to you.

All devices were purchased and paid for by myself.