Fourth Wing (Book Cover) - Hueforge Print and Lithophane

Fourth Wing Cover Art - Hueforge Print and Lithophane

Perfect gift for your favourite book lover! This print serves as both a front and back-lit hueforge print. Hold it up against a light and the light will shine through the print.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA Meta Sunlu White Transmission Distance: 6
• PLA Sunlu Beige Transmission Distance: 8.2
• PLA+ Sunlu Coffee Transmission Distance: 3
• PLA Kingroon Black Transmission Distance: 0.3

Swap Instructions:

• Start with White
• At layer #4 (0.4mm) swap to Beige
• At layer #6 (0.56mm) swap to Coffee
• At layer #12 (1.04mm) swap to Black for the rest.
  

If you like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.