Fan Mod For PLA Printing
Print Profile(1)
Bill of Materials
- 12 V Step-Up USB to 4-Pin Fan Cable x 1:
- 120MM Desktop Fan x 2:
Description
I wanted to avoid having the and door open during pla prints. Slide the lid back and place the bracket. 2x 120mm daisy chained fans connected to a 12 V Step-Up USB to 4-Pin Fan Cable.
I ran a 2 hour test with a 80c bed and AUX fan on 50%, and it did not go above 32C.
I have also done a bunch of PLA printing with no issues.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)