Next Level Racing Shifter Mount

This is a shifter mount for the Next Level Racing Wheel Stand Lite 2.0 / Victory Simulator Cockpit. Maybe for other NLR products as well, not sure.

See photos 2 (my design) and 3 (original metal one) for a comparison.

This is a replica of the one that comes with your wheel stand / cockpit, incase you lose the original metal one or have it occupied by a shifter and want a second one. I saw people on reddit commenting they are buying them from NLR for $90 as a separate piece which is quite expensive, this is a great alternative which is just as sturdy.

Based on this mount, I designed the rotating keyboard tray for the same wheel stand / cockpit, which you can find on my profile.

I recommend to print this in PETG, just like the print profile provided. If you only have PLA, it should be okay as well. 

Hardware:

• Two M8 bolts + washers, possibly with a nut as well depending what rig / where you are bolting it on. Minimum length is 20mm but 25mm is recommended. The bolts that come with NLR products should work (what I have in the pictures)
  • If you choose to print and use the shifter bracket as well, you will need two additional bolts, M8 or smaller approximately 40mm and two nuts for them.

Any questions or requests, feel free to leave a comment.