Radxa Rock 5A Case
Print Profile(1)
Description
Yeha the fan is for a different board I know I know.
Cases for the Radxa Rock 5A, There is a version without any holes, as well as with a GPIO cover.
If you don't want the logo simply merge all the parts together in your slicer.
Due to the tiny wall between the USB ports and the heat I recommend PETG or something more heat resistant.
The design needs no hardware, but there are holes for two M3*6 screws if you are feeling extra.
To put the board in align the USB and ethernet connectors and then rotate the board in from the other side. To take it out push it up from the SD card slot.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)