Gardena Garden Hose / 6mm 8mm 10mm Quick Connector
Print Profile(1)
Description
Adapter that allows you to connect a garden hose to a tube with either 6mm, 8mm or 10mm INNER diameter.
It's designed in a way to be printed from the narrow part facing downwards and adding support for the big flat surface.
I personally printed it in PA6-GF with PA/PET Support interface on a 0.4mm nozzle.
I wouldn't recommend using any kind of PLA, but most other filaments should be fine.
It's recommended to heat the tube before pushing it onto the adapter, the adapter is 0,8mm bigger on purpose to guarantee a tight fit.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)