3 Way Connector 1" (~25mm) Corrugated Conduit Tee
Print Profile(1)
Description
This is a 1 inch (25mm) remix of the ¾ inch (19mm) corrugated conduit 3-way tee by CarlitosCUU. This profile is for PETG and I rotated the model up on edge to optimize support usage and removal. I'm using it for 1" split corrugated polyethylene tubing (convoluted wire loom) from the hardware store. The original model was designed for ASA but I simply scaled it up (131.3%), so it should still work with ASA and other materials.
M4 flat head screws still work with this, but you may consider adding washers or using wider head screws.
Required hardware:
-4 M4 X 10 screws
-4 M4 nuts
-Silicone based sealant (Optional if you're using solid tubing and need a watertight seal)
This remix is based on
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)