enesnazmi

cover

WhatsApp Image 2026-04-07 at 16.02.28.jpeg

dfdf.jpeg

fdfd.jpeg

dfdfd.jpeg

dfdfdfd.jpeg

plate_1.png

Print Settings &amp; Specifications<ul><li>Initial Layer Height: 0.16 mm (Optimized for better bed adhesion).</li><li>Initial Layer Line Width: 0.5 mm (Increased for a stronger first layer foundation).</li><li>Wall Loops: 3 (Enhanced structural strength and surface quality).</li><li>Outer Wall Speed: 30 mm/s (Slowed down for high-detail exterior finish).</li><li>Inner Wall Speed: 50 mm/s (Balanced for speed and stability).</li><li>Infill Density: 5% (Lightweight yet strong).</li><li>Infill Pattern: Gyroid (Provides multi-directional strength and prevents nozzle clogs).</li><li>Ironing: Enabled on Top Surfaces (Flow rate: 40%) for a smooth, professional top finish.</li><li>Support Type: Auto Tree Supports (Slim Tree style for easy removal).</li><li>Support Z-Distance: 0.2 mm (Top and Bottom Z-gap for effortless support snapping).</li><li>Initial Layer Infill Density: 90% (Ensures a solid base for the model).</li></ul>&nbsp;

0.12mm layer, 3 walls, 5% infill

The model was printed with a 0.12 mm layer height and a 0.16 mm first layer height. It is important to set the supports properly.

Ezio mini figure

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models