Enel Deck Box with Dice Tray - One Piece TCG
Print Profile(1)
Bill of Materials
- Glue x 1:
Description
One Piece TCG Deck Box with manga panels for the enel leader. The original did not have enel so I decided to take a crack at it and pick a few of my favorite panels to model onto the sides. However when making the original did get Enel added (however I had already created this) - so think of this as that with more panels! and the option for a tray
There is also a deckbox for a better double sleeve fit. (Bandai sleeve + outer sleeve)
Steps for the deckbox:
- Print the sides
- Try to use .2mm nozzle
- Print at .1mm layer height (with .2mm nozzle)
- 1.1 top layer shell
- Wall generator should be Arachne
- Print the Deckbox (with a pause at 456)
- At pause, insert the side panels (make sure you're inserting it right-side up!)
- Resume the deckbox
- Print the deckbox top
- Insert magnets (optional)
- I'd recommend glue
For the deckbox with tray
- Print with PETG interface support layers (IF POSSIBLE), will make it easier to remove the support from the bottom of the deckbox
S/O to the original designer and design located here: HERE
This remix is based on
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (5)