pfamsacct1

cover

20260405_070946.jpg

20260405_071049.jpg

Fidget

plate_1.png

1d332f36bd2082d7.jpg

I print this upright, so I use these settings:<ul><li>Support→Enable Support: check<ul><li>Type: tree (Auto)</li><li>Threshold angle: 40</li><li>On build plate only: check</li></ul></li><li>Advanced→ Initial Layer Expansion: 10mm (This is for the brim as brim setting won&#39;t work with the support)</li><li>System Profile Preset: 0.24mm Draft @BBL (This is to keep it light) The risk is the spike breaking off when dropped</li></ul>Notes: <ul><li>Due to this supporting a candle and food, I use PCTG filament. PETG will work fine. I do not recommend PLA or other non-food-safe filaments. </li><li>I recommend cutting the candle bottom off to make a 3&#34; candle that will stand out ~2-2.5&#34;</li><li>The bottom stake can break when dropped. If this is a concern for you: Right click on your print, click “Height Range Modifier”, click layers and enter: “3 to 40mm”. Increase “Sparse infill density” to your liking. Try 60% if you are unsure. This will make the stake stronger.</li></ul>

0.24mm layer, 2 walls, 15% infill

Kulich (Easter bread) candle holder&nbsp;

XB Kulich (Easter Bread) Candle Holder

ASIA

Print Profile(1)

Description

Comment & Rating (2)

License

Related Models