Natures Moon

cover

IMG_0595.jpeg

IMG_0597.jpeg

IMG_0598.jpeg

IMG_0599.jpeg

IMG_0600.jpeg

IMG_0601.jpeg

IMG_0602.jpeg

sheriff color 3.png

sherrif color 1.png

sherrif color2.png

makerlab

plate_1.png

6e55a936329752dc.jpeg

<p>1. **Dial in Retraction:** As seen in the reference image, the space between the body, arms, and gun can be prone to stringing. If using Wood PLA or PETG, ensure your retraction distance and speed are well-calibrated. 2. **Support Strategy:** Use organic/tree supports. The wide brim of the fedora and the extended arms holding the idol and gun require careful support generation to avoid scarring the visible under-surfaces. 3. **Material Selection:** This model begs for textured filament. Wood-filled PLA gives it a fantastic &#34;hand-carved peg toy&#34; aesthetic. If using Wood PLA, upgrade to a 0.6mm hardened steel nozzle to prevent clogging. 4. **Cooling:** Ensure your part-cooling fan is running at 100% for the overhangs on the hat brim to prevent curling. 5. **Assembly:** If printing parts separately (as suggested by the BOM), use a high-quality CA glue (superglue) and accelerator for a rapid, permanent bond on the arms and hat. Recommended Printer Settings Based on the image provided, here are some suggestions to optimize your slice settings for the Bambu A1 to improve print quality, specifically addressing the issues visible in the print: **1. Layer Height:** * The current print shows very prominent layer lines, indicating a relatively high layer height was used (likely 0.2mm or higher). * **Recommendation:** To get a smoother finish, especially on detailed models like this, reduce the layer height. Try **0.12mm or 0.08mm** for high-quality profiles. This will significantly reduce the visibility of layer lines, though it will increase print time. **2. Wall Loops (Perimeters):** * The surface looks a bit uneven in places, which can sometimes happen with too few walls. * **Recommendation:** Ensure you are using at least **3 wall loops** (perimeters). This provides a better surface for the outer wall to build upon and can improve the overall solidity and appearance. **3. Outer Wall Speed:** * Printing the outer wall too fast can lead to decreased surface quality and more noticeable ringing or artifacts. * **Recommendation:** Slow down the outer wall speed. Try setting it around **50-80 mm/s** for better surface finish. **4. Temperature and Cooling:** * There&#39;s some stringing visible (e.g., around the gun). The material also has a slightly &#34;matte&#34; or textured look, which might be characteristic of the specific filament (looks like a wood-filled or matte PLA), but could also relate to temperature. * **Recommendation:** * **Temperature:** If you are experiencing stringing, try lowering your nozzle temperature by 5-10°C. Perform a temperature tower to find the optimal setting for this specific filament. * **Cooling:** Ensure your part cooling fan is running at **100%** for regular PLA (if that&#39;s what this is). Good cooling is essential for sharp details and reducing stringing. **5. Retraction Settings:** * The stringing is a direct indicator that retraction settings need adjustment. * **Recommendation:** For a direct drive printer like the Bambu A1, typical retraction settings are around: * **Retraction Length:** 0.4mm - 1.0mm * **Retraction Speed:** 30 mm/s - 40 mm/s * *Note:* You may nee</p>

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>Bring the thrill of the ultimate treasure hunt to your desktop with **&#34;The Adventurer&#34;**! Inspired by classic cinema heroes, this highly stylized, cylindrical figure packs iconic details into a fun, minimalist design. Armed with a trusty revolver, a coiled whip at his hip, and gripping a priceless ancient idol, this hero is ready to guard your workspace from rolling boulders and hidden traps. The unique &#34;barrel&#34; body style gives it a distinct charm that stands out from standard action figures, making it a fantastic conversation piece. **Key Features:** * **Incredible Detail:** From the creased fedora to the tiny sculpted idol, the textures pop beautifully. * **Perfect for Specialty Filaments:** Looks stunning when printed in Wood PLA, Matte Brown, or Antique Bronze filaments to give it a carved or cast-metal artifact vibe. * **Highly Marketable:** With a low material cost and high perceived value, this is an incredibly profitable model for your 3D printing shop or local craft fair.</p>

Stump People - Sheriff  -Wood Log Men

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models