E-shooter Flare Smoky Tracer Front/Side Protector

This is a protective cover for the airsoft E-shooter Flare Smoky BT tracer unit. It is inspired by the fear of a direct BB hit to the front glass, which will undoubtedly shatter it. 

I have designed the protector in 3 parts:
1. Main body: The tracer unit slides into it and is kept inside firmly. No chance for the protector to fall off.

Two interchangeable, threaded designs of the end cap (muzzle break), which protect the front glass and screw on the main body.

2. The first cap has vents on the front, which allow the light from the LEDs to be clearly visible when using the tracer
3. “Stealth” cap, which has only the barrel hole on the front and holes on the sides. This one greatly reduces the frontal visibility of the lights, while still allowing some on the sides.

You can swap them whenever you feel like it!

The tracer can be removed by unscrewing the front cap and gently pushing it with your finger out. Easy and quick.

Both caps slightly influence the pattern of the smoke from the tracer, breaking it into interesting shapes.

The design enhances the overall look of the attachment and makes its use worry-free.

I have tested it with Esun PLA+ (the yellow in the images) and BambuLab Charcoal Matte PLA

The parts are very hard to break, but I suggest using PLA+ for better longevity.

Not compatible for real tracers/firearms use.