Search models, users, collections, and posts
6 Inch Swimbait (TPU Tail)
IP Report
GIF
Print Profile(1)
swimbait with tpu tail and 0.2mm layer, 2 walls, 0% infill
Designer
7.3 h
1 plate
Open in Bambu Studio
Boost
18
40
0
0
16
1
Released
Bill of Materials
Bambu Filaments
Select all
Description
Description
Easy to build swimbait 6 inch
Parts List:
-Treble hooks size 1/0 black nickel
-0.88mm wire https://www.amazon.com/dp/B000BPEQAE
-Screw Eyelets size 5*12mm
Assembly:
-Print all parts with 0% infill
-Pause print on top holes and put in weight ( I recommend using cut lead weights unlike the image)
- Screw in and add glue to all eyelets
-If you want to paint do before next step.
-Get your 0.8mm wire and put into the bottom holes ( You may have to grab pliers and kind of force it in even if the holes are a bit blocked by plastic just push hard enough and it will go in)
-After connecting the 3 parts with the wire make sure they are in good and cut the eccess and add a drop of glue.
License
This user content is licensed under a
Creative Commons Attribution-Share Alike
Comment & Rating (0)