Jim Beam Folding door display box

If you find my designs interesting and useful, and would like to see more in the future, please consider giving me a boost and becoming a supporting member. 

Also, if you need parts for any of my designs, please use the BOM link provided on the model page when buying. This gives me a small commission.

Jim Beam Folding door display box.

I've had many requests for this one. The world's most popular bourbon Jim Beam box is finally done. For this one i tried to implement a wood like texture on the front. The idea was to make it look kind of like a small cabinet for the bottle. There is a wide variety of brown filament, so you can basically choose the type of wood on the box.  Hopefully this design fits your homebars estetics.

Features

• LED Compatible: Includes an alternative base specifically for the LED Lamp Kit 001 to give your bottle a golden glow.
• Cutout for LED in the lid :  There is a cutout in the lid to fit the KC007 wireless LED
• Magnetic Snap: Optimized for 8x2mm magnets to provide a satisfying, secure "click" when closing the doors.
• Assembly guide : Follow the detailed assembly guide below.
• Internal dimensions: 91x91x320mm (Perfect for a 1 liter bottle of Jim Beam)

Technical Specifications :

Hardware Required

• Steel Rods: 2 pcs (ø6mm x 350mm long)
• Magnets: 30 pcs Round 8x2mm (Required for door closure)
• Adhesive: CA Glue (Superglue) for magnets and final assembly.
• Lighting: Optional LED Lamp Kit 001 and/or Kc007 LED
• Filament : I used Bambu's filament for this project. All the colors can be found in BOM.

Want it to look exactly like the photos? Use these filaments :

1.  Bambu Lab PLA matte Charcoal or Basic black
2.  Bambu Lab  PLA silk + Gold
3.  Bambu Lab PLA matte scarlet red
4.  Bambu Lab PLA Matte Caramel

5.  Bambu Lab PLA matte Jade white

    

   You can find them in BOM

You can find the steel rods you need here  →    (affiliate link)

If Bambu i out of stock, buy LED here → (affiliate link)

If Bambu's 8x2mm magnets are out of stock! You can find some here → (affiliate link)

Assembly Tips

• Alignment: Ensure your steel rods are clean and straight for the smoothest door rotation.
• Supports :  Make sure all the supports are removed before assembly.
• Magnets : Be sure to orient the polarity of the magnets under assembly.
• Rod length : Before gluing the top on, double check that the rods aren't to long.
• Tolerance : Printers and filaments can behave differently. In rare cases, the holes can be a bit to tight because of settings.   If this happens, i recommend using a drill with a 6mm drill bit. Just run it through the hole a few times and you should be fine. 

One's you have printed all the parts and acquired the accessories you need, just follow the assembly guide down below.

Every piece is labeled. Use the numbers on the parts and follow the assembly guide. Easy peasy!

When your done, it should look something like this.

Follow me if you want to see more of my designs in the future!