Candle wind shield, protector
Print Profile(1)
Description
Description
This protector would help with:
- Protecting candle from wind
- Protecting the candle from collisions
- Protecting your hand, clothes and floor from melted wax droppings
IMPORTANT! - it is highly recommended to print it in PETG due to higher temperature resistance.
Although PLA has not been tested, it may work as well but diameter of the cup section need to be increased.
Boost Me (for free)
If you find it useful, I would be very grateful for your Boost!
Buy me a coffee on Ko-fi: https://ko-fi.com/craftmeng
Feel free to share your prints or improvements. I’m very grateful for your likes, boosts, follows and comments, your support is greatly appreciated!
Have a wonderful day!
Print settings:
I found these print settings work perfect and all layers are consistent:
Outer wall width: 0.8 mm
Scarf seam
Wall generator: Arachne
Wall loops: 2 (actually only 1 is enough)
Support: no
Brim not needed but can be added if it doesn't nicely stick to the bed
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (1)