Snap - A Perfect Card Case - Free 3D Print Model

Search models, users, collections, and posts

GraysonTidbury

Tools>Organizers

IP Report

GIF

Print Profile(1)

All

P1S

H2C

A1 mini

H2D

H2S

X1E

H2D Pro

P1P

X1 Carbon

P2S

X2D

A2L

The Perfect Case

Designer

3.3 h

1 plate

4.6(34)

Open in Bambu Studio

Boost

922

3286

1.2 k

922

Released

Description

Filament Storage

Boost Me (for free)

I SHAMELESSLY ASK PLEASE!! One click is all it takes, and it helps me get closer to achieving my goal of getting a free 3D Printer. I spent hours on this model, and if you like it, every boost gets me a dollar closer. I would really appreciate it and all it takes is a click!! :)

This is a pretty awesome card case with a super satisfying snap! I spend way too many iterations making sure this works perfectly. It should be able to fit all poker and bridge size cards that are thrown at it. It is the only one that I have seen with a track that lets you put on the top at an angle and seamlessly guide the two halves together. The smooth swoop, inspired by Filament Owl's Deck Case, allowes there to be almost no sharp edges. There is super thin layer lines make it have a seemingly frictionless slide and extremely premium feel. I plan on posting a new model in the next week or two that is parametric and will be able to take every single size of card that is made, but this one is absolutely perfect for a deck of cards. Have Fun Printing!!!

Comment & Rating (85)

@user_1739387381

Pinned by Designer

Print Profile

The Perfect Case

printed out perfectly. I like the design. thank you

@miders480

this seems kinda like a rip off of Craig hill….

The designer has replied

@Irlyneedpoints

was about to say the same thing…

@GraysonTidbury

Gonna be honest, I have never heard of them or seen em. It kinda does though

@Rensming

Replying to @GraysonTidbury :

no way bro it’s literally identical

@gpwunderlich

I absolutely love how this turned out, but it is hard to open. Is it possible that I am opening it wrong?

The designer has replied

@GraysonTidbury

Pinch the short sides instead of the long side to open it.

@gpwunderlich

ok that really helped. thanks.

@robeert.77

i am pretty new to 3D printing. i tried to print the smaller part with this yellow PLA mate. Do you know how can I fix those corners? They look pretty bad. Except the corners, this looks amazing

The designer has replied

@GraysonTidbury

Try washing your plate with dish soap, it will help with adhesion. You have to be careful to not touch your plate excessively because the oils on your hand will cause adhesion issues. If it doesn’t work, then let me know.

@robeert.77

Replying to @GraysonTidbury :

the plate was pretty clean. I have to addmit that I did some prints from the last wash. Anyway, I tried today with the plate fresh clean and the results are the same. Maybe is the filament, I will try again tomorrow with a different color

@sumnerp5

can you please make the two parts be listed a two parts that way I can print it with different color parts without ams

The designer has replied

@GraysonTidbury

In the slicer, right click the model, click split, then “to objects.” This should make the two halves separate.

@GraysonTidbury

I will make the print profiles available today so it is possible to print different colors from the app

@sumnerp5

thank you

@David.Deason

Print Profile

The Perfect Case

Printed great! Works great!

@Akira_Sakura

printed perfect, great fit..

@p1sprinter999

Boosted

Will this work for credit cards?

The designer has replied

@GraysonTidbury

Im sure you could probably fit some in there, but I havent yet made one specifically for them. I will be making a parametric version of this soon and maybe that would be better, but it doesnt have individual sleeves. It was designed for playing cards.

(Edited)

@p1sprinter999

Boosted

Ok!

@sapshot

Print Profile

The Perfect Case

Not good. Unfinished.

The profile uploader has replied

@GraysonTidbury

What should I change?

@sapshot

I don't understand much about design technicals but it weighs a little too much for a card case. Secondly, it doesn't close very easily and the print turned out to be unfinished. I'll share an image as I reach home.

@sapshot

here

@user_2283788484

How many cards can it hold?

The designer has replied

@GraysonTidbury

It is meant for a 52-card deck, but you can fit 55 if you want to. I am going to post a parametric version soon.

@user_2283788484

Replying to @GraysonTidbury :

Thank you so much!

@user_2271227771

cool

@the_a_dore

magnets needed?

The designer has replied

@GraysonTidbury

No, it is just a ridge that makes the case snap together

@the_a_dore

Replying to @GraysonTidbury :

thanks

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Business Card Holder

LemonArts

16.7 k

5.6 k

NFC Business Card Template

ExpiredTapWater

10.2 k

5.7 k

Perfect Match Romantic Gift

MrFixIt4Ya

143

354

Filament Sample Card

喵喵mya

11.3 k

4.3 k