Lucero Star - HueForge Wall Plaque | Fan Art

Fan-made HueForge wall plaque featuring the iconic Lucero star logo — the cursive "L" set inside a bold outlined star with radiating spikes. Printed in two-color PLA with the design raised from the base panel.

This is an unofficial fan piece. Not affiliated with or endorsed by Lucero or their management.

Print Details:

• Technology: HueForge / FDM multi-color
• Colors: White base, Red design layer
• Filament: PLA
• Layer height: Per HueForge-generated profile (recommend 0.12mm for detail)
• Supports: None required
• Bed adhesion: Standard PEI sheet

Notes:

• Print orientation: Flat on bed, design face up

• Red elements are raised relief — no painting required

   

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 166.6x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm

    #bb1e10 PLA+ Numakers Nuclear Red  Transmission Distance: 2
    #e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
    Start with Nuclear Red
    At layer #17 (1.44mm) swap to White for the rest.

Fan art only. All rights to the Lucero logo belong to their respective owners.