T-shirt print - Fiat Punto
Print Profile(1)
Description
📝 Description
I created this 3D model starting from an SVG design and optimized it for clean and reliable 3D printing.
It’s designed to be simple, scalable, and suitable for creative applications like custom decorations or wearable elements 👕🖨️
A great way to turn 2D designs into physical objects and experiment with your own style.
🛠️ Instructions
Download the model and open it in your slicer (e.g. Bambu Studio) 💻
After printing, carefully remove the model from the build plate.
⚠️ Avoid applying too much force, especially if the model has thin details.
If you plan to use it on fabric:
- Place the T-shirt on a flat surface
- Position the printed model where desired
- Use heat-resistant paper (like baking paper) between the model and the iron 📄
- Apply heat evenly for 15–20 seconds 🔥
(Optional) Turn the T-shirt inside out and apply heat again for better adhesion 👕✨
🖨️ Printing Tips
- Layer height: 0.2 mm
- Infill: 10–20%
⚠️ Important
- Avoid very thin scaling, as small details may become fragile
- For clothing applications, wash at temperatures below 50°C (122°F) 🧼🌡️
- Higher temperatures may reduce adhesion over time
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)