IKEA Skadis - INIU Portable Charger Mini PowerBank
Print Profile(2)
Description
There wasn’t a design specifically for the INIU Power Bank Slim 45W Fast Charging Portable Charger with USB C Cable, 10000mAh Battery Pack (P41), so I decided to quickly whip one up myself.
Tips:
- Position all the Peg Board Hangers into the slot before pushing down.
- This should fit anything that fits in a 18mm x 38mm opening
- You don't need to print it with PLA Tough+, I just had one laying around.
Design Reasoning:
The holder features an open front and back to ensure plenty of airflow during charging. I’ve staggered the two power bank slots so you can easily see the "Paw Pad" battery indicator, and the side button remains fully accessible. While I considered print orientation, the two Power Banks are light enough that the 7 hangers are more than sufficient for an upright print without any durability concerns.
Printing Instructions:
Bambu Studio's default “Strength Profile” and added Tree Slim Support. I used 0.6mm nozzle to speed up the print, but a 0.4mm nozzle would work perfectly as well. As well, PLA Tough+ isn't necessary, I just had it laying around.
Hardware:
Printer: Bambu Lab A1 with AMS Top Mount
FIlament: Bambu Lab PLA Tough+ Black (Tough+ isn't necessary)
Slicer: Bambu Studio
Nozzle: Bambu Lab A1 0.6mm nozzle
Plate Type: Bambu Lab Textured PEI Plate
Profile: 0.30mm Strength @BBL A1 0.6 nozzle + Tree Slim Support
Boost Me (for free)
Likes & Boosts keeps me going!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)