Shiny Charizard - 2 pcs Hueforge Picture

Want to sell physical prints of this design?
Become an officially licensed SkyLab 3D seller here: The SkyLab 3D | Patreon

• The Frame used in the picture can be found here: Modular Magnetic Frame System for Hueforge Art

Shiny Charizard – 2 Piece Hueforge Display

This 2-piece Hueforge brings a bold take on Charizard in its shiny form, captured mid-emergence with wings spread and flame lit. The darker tones emphasize the silhouette while the bright highlights and subtle color accents—especially the eye and flame—add depth and intensity to the piece.

The artwork leans into a high-contrast, almost ink-splatter style, giving it a dramatic, poster-like feel while still translating cleanly into a layered Hueforge print. Breaking the design into two panels allows for a larger display presence while keeping each piece printer-friendly and easy to assemble into a seamless final image.

This was designed with both display and printability in mind—balancing detail, contrast, and clean layer transitions to make the final result pop once completed.

Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Each model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.88mm
The Max allowed Thickness is 2.88mm and the Actual Thickness is 2.72mm

This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #15 (1.28mm) swap to Dark Gray
    At layer #19 (1.6mm) swap to Red
    At layer #21 (1.76mm) swap to Safety Orange
    At layer #22 (1.84mm) swap to Yellow
    At layer #23 (1.92mm) swap to Dark Gray
    At layer #29 (2.4mm) swap to Ivory White for the rest.