Tablet Music Stand Holder
Print Profile(1)
Description
I've been playing an instrument for a while and use my tablet as a digital sheet music. Until now, the tablet always sat loosely on a regular music stand, which was quite wobbly. That's why I developed a sturdy holder that securely fastens the tablet.
Features
- Secure Hold: The firm fastening prevents the tablet from slipping or tipping over.
- Compatibility: The holder has a minimum width of approx. 17 cm. This means that all tablets of this size or larger will fit easily.
- Anti-slip Protection: Since the 3D-printed surface alone is somewhat smooth, I glued in a thin rubber mat. This makes the device sit very securely.
- Optimized for K&M: The holder is precisely designed for common K&M music stands.
- Print Material: I used PETG for all parts.
Required Material (hardware kit)
The following small parts are required for assembly:
- 4x 3D Print Inserts (M4 x 4 x 6 mm)
- 4x M4 screws (8 mm length) – for attaching the ball joint to the holder.
- 4x countersunk wood screws (3.3 x 25 mm) – to secure the handles to the holder.
Adjustments
If you use a different music stand, you can easily design your own mount: The ball of the joint is fastened in a bore of M15 x 13.5 mm.
Since I only recently printed the music stand, I will still test it and possibly add small adjustments. If you have any suggestions for improvements, I would be happy to hear them.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)