8 mm LED Strip Light Diffuser (Govee Compatible)

LED Light Strip Mount & Diffusion Bar (Govee Compatible)

This is sized for an 8 mm wide LED strip and is compatible with the low-profile version of this diffusion bar system (link at bottom).

Put together your custom diffusion bar using two components: Mount rails and Diffusion attachments

Mount Rails Included:

• 4 mount rail lengths (2 cm, 10 cm, 20 cm, 30 cm)
• 4 mount rail types (flat ends, flat-male connector, flat-female connector, middle connector)

Diffusion Attachments Included:

• 4 diffusion bar lengths (2 cm, 10 cm, 20 cm, 30 cm)
• 2 diffusion bar thicknesses (0.8 mm for less diffusion, 1.6 mm for more diffusion)
• 2 diffusion bar end caps (0.8 mm thick, 1.6 mm thick)

Rail Installation:

• Double-sided tape, or,
• 1 mm cigar box nails (with 2 mm diameter head)

Do you need other lengths?

You can try using scaling in Bambu Studio. However, I have not tested this to confirm that the mount rails and diffusion attachments will remain perfectly aligned. Another option is to cut the middle section and resize as this will leave the tabs untouched (excluding the 2 cm lengths).

Low profile model: https://makerworld.com/en/models/2560399-low-profile-led-strip-light-diffuser-8-mm-width