Search models, users, collections, and posts
colmen ct200u mini bike
IP Report
This model is created by Image to 3D
Make Your Model
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
13.2 h
1 plate
150% Scale, PETG Support Interface, A1 Mini Compatible
16.1 h
1 plate
Open in Bambu Studio
Boost
13
18
0
1
10
3
Released
Description
This is a very detailed model of the colmen xt200u minibike. Since it is so detailed it is very hard to print I tried 3 times before getting the supports off without breaking it too much. The third time I printed it with petg supports and that worked so, that is how the 3mf is printed.
I did not print the exact 3mf, but it was very similar.
If you are printing the stl. print it larger I did mine at 120%.
If you have solvable support material use that but, if you are printing it with PLA supports print it very large so it doesn't break when your pull the supports off.
Model made with AI.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (0)