Butterfly hair accessories Only 9g - Free 3D Print Model

Search models, users, collections, and posts

Lanxa

Fashion>Other Fashion Models

IP Report

GIF

Print Profile(1)

All

A1 mini

P2S

H2S

P1S

H2C

H2D Pro

X1E

P1P

X1 Carbon

H2D

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

1.1 h

1 plate

4.8(11)

Open in Bambu Studio

Boost

457

1302

384

246

Released

Description

Boost Me (for free)

Thank you for your assistance.

Highlighted design features of the model

The butterfly hair accessory is designed inspired by the elements of butterfly wings. It resembles a butterfly resting on the hair. By leveraging the varying light transmittance of different layers, a certain sense of layering is achieved. The entire piece only requires 9 grams of printing material, making it easy to print. The assembly is straightforward and no glue is needed.

Printing setting suggestions

To achieve the best display effect, it is recommended to refer to the following settings:

Printing Consumables: PTEG

Layer Height: 0.1mm for the first layer, and 0.2mm for subsequent layers (this strikes a good balance between printing efficiency and detail performance. Variable layer height is selected for the wings)

Fill Rate: The default (15% - 20%) can meet the strength requirements.

Support: Support needs to be enabled. It is recommended to use "tree - like support" for easy disassembly and to protect the wing surface.

Comment & Rating (30)

@Ironirish

turned out wonderful (PLA metal) thank you🙏

The designer has replied

@Lanxa

Why does it seem so huge?

@Ironirish

Replying to @Lanxa :

6mm beads behind it!

@Lanxa

Replying to @Ironirish :

I see

@oleza

It turned out great! I used PLA plastic and it's still super!!! Thank you♥️♥️♥️

The designer has replied

Show original

@EddieArtieM

What print settings did you use?

@Lanxa

this is very beautiful

@Kurama4545

Print Profile

0.2mm layer, 3 walls, 15% infill

love it! the only issue i had was getting the wings in but i just nipped the little nubs on them a bit and they slid in snugly. i printed it in a purple sparkle pla

The profile uploader has replied

@Lanxa

I love this color!

(Edited)

@Kurama4545

Replying to @Lanxa :

i don't know the brand there's no sticker on the roll but bambu has a similar purple sparkle its just a bit lighter than this one 💜

@Nroseseer

Made this for my niece, it seems really fragile but is actually fairly sturdy. I used a butene torch to remove some stranding that occurred and it started warping the wing. I just kinda embraced it, and it let me curve the wings and even let me bond the top and bottom wings together to give it strength. As Bob Ross said "Happy Accident". Used a Translucent Blue with original intent on adding thinned paint.

The designer has replied

@Lanxa

Thanks for the feedback. The deformation caused by the fire makes it more vivid. I think you can try more other bending effects. It will be interesting.

@Harpe02

Print Profile

0.2mm layer, 3 walls, 15% infill

very cute ! I printed it in translucent PETG 😊 I had a failed spaghetti first print, but I think it was a mistake on me (maybe filament just not dry enough or the plate not quite clean...? ) but then it worked ! I also had a hard time getting the small wings in... almost broke them but ended up succeeding! sorry for the bad quality photo, I struggled to take a good pic ahah

(Edited)

The profile uploader has replied

@Lanxa

Wow, the transparent material makes it prettier, thanks for the repost

(Edited)

@Aleksandra_Juk

very beautiful hairpin, but there is a point, it holds quite mediocrely, I will wear it, I hope it will not fall off, I wanted to improve the grip. but I used PLA, maybe with the use of pa, the grip is better

The designer has replied

Show original

@Lanxa

Thank you for your feedback, it’s very beautiful

@user_202803662

Print Profile

0.2mm layer, 3 walls, 15% infill

had issues getting the smaller wings to clip in, gave up and glued them but the kid loves it

The profile uploader has replied

@Lanxa

Maybe the tolerance I set is too small to ensure it doesn't fall off

@user_202803662

Might just be me. Struggling to get the smaller wings into place. Suggestions?

The designer has replied

@Lanxa

Maybe I set the tolerance too small to ensure it doesn't fall off. Increase efforts

@Duo_3D_Print

Good!

The designer has replied

@Lanxa

Thanks!

@Smith_house

Print Profile

0.2mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.