Clamp for Windmill (Toroidal, Sunflower, etc))
Print Profile(7)
![[V1] 0.2mm layer, 5 walls, 25% infill](https://makerworld.bblmw.com/makerworld/model/US15e44672a4bf0/69823144/instance/2024-03-15_6d9c46a2c3e8c.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
![[V2] 0.2mm layer, 5 walls, 25% infill](https://makerworld.bblmw.com/makerworld/model/US15e44672a4bf0/88069894/instance/2024-04-14_adaa461bdf8f8.jpg?x-oss-process=image%2Fresize%2Cw_100%2Fformat%2Cwebp)
Description
Universal Clamp for Windmill → New Heavy Duty Clamp avaible
On the top Site it has a hole to fit perfectly the rod from Hexagon & Toroidal Windmill.
(Added V2 Print Profile with second hole for 0° and 90° mounting.)
Use the screw clamp to securely attach the wind turbine.
For example, to balcony railings, window sills or other boards and poles.
Screw Clamp fits up to 45mm square and Ø45mm pipes!
If you only use the full size, i added a alternative short screw on build-plate 2 ✔
The Clamp uses a simply mechanism which is easy to print, it does the job great! ✔
I printed in Basic PLA without problems ✔
Assembly:
- Screw the handle in, you can grease a bit if you want
- Place the loose jaw in place and screw in one time completly togheter. The Cone from the Screw should snap in the loose jaw.
- Place the rod from the windmill in the hole on the top.
- Find a good place and screw on gently
Thank you for leave a like…..Happy Printing😉👍
Commercial license you can get here:
https://www.patreon.com/BamBamDesign/membership
Membership
You want to sell printed objects from my designs or just support my work? Now you can subscribe on Makerworld! Thank you!
This remix is based on
License
Comment & Rating (776)