Delixi 3.0m Measuring Tape Pegboard Storage Holder

📏 Say goodbye to messy drawers! A pegboard hanger specially designed for the Delixi 3.0m measuring tape.
Is your Delixi 3-meter measuring tape still “missing” in a drawer? This model is precisely adapted for the common Delixi 3.0-meter plastic measuring tape on the market (as shown). It securely mounts to IKEA SKÅDIS pegboards, making access clear and putting it back effortless!

✨ Key Advantages
✅ Snug Fit: Side limits + bottom support prevent shaking and falling off.
✅ Pegboard Ready: Standard top hooks are compatible with all IKEA pegboard hole spacings, and vertical hanging does not obstruct your view.
✅ Lightweight and Durable: Hollowed-out weight reduction design balances strength, convenience for use, and material saving. Both PLA and PETG can be used for printing.

🛠️ Applicable Scenarios
Home DIY corner | Woodworking workbench | Renovation tool wall | Garage storage area | Maker space
— Keep your most frequently used measuring tape always within “arm's reach”!

🖨️ Printing Suggestions
- Material: PLA (recommended) / PETG (for higher toughness)
- Parameters: Layer height 0.15~0.2mm | Infill 15%~20% | Nozzle 0.4mm

💡 Tips:
1️⃣ Please confirm that your measuring tape model is consistent with the common Delixi 3.0m type (internal shell dimensions 58×40mm L×W).
2️⃣ If the measuring tape is slightly loose/tight, fine-tune the fit by adjusting the print scaling ratio (±1%).
3️⃣ It is recommended to pair it with other tool accessories from the same series, such as laser inclinometer dust plugs and grease injectors, to create a unified style tool wall!

Tidiness begins with a small holder—giving every tool its dedicated spot. 🌟