Saint Lucy's Crown (parametric)
Print Profile(1)
Bill of Materials
- Wireless LED Christmas candles (d=15mm, removable clip) x 1: https://www.amazon.de/dp/B0FCBTLVXR?ref=ppx_yo2ov_dt_b_fed_asin_title
Description
I don't know if anyone has a use for this, but here it is:
Parametric model of a Saint Lucy's Crown (see: https://en.wikipedia.org/wiki/Saint_Lucy's_Day) , made to fit wireless christmas tree candles.
The candles I used where cheap on amazon, they have a diameter of 15mm and the clip to hold them on the tree is removable and fixed to the candle by a 5mm diameter pin. If you get different candles, the scad model needs to be adjusted accordingly.
Fitting: measure head circumfence and use a slightly larger inner circumfence for the crown (e.g. measured 520mm, use 535mm) as your head probably is not a perfect circle in cirumfence ;-)
Number of candles can be adjusted. Tested with Bambu PETG-HF, matte PLA proved to brittle for the candle pins (they break and get stuck in the candle and are a real pain to remove from there)
The print profile is for size 550mm and 8 candles - use the customizer for your own values!
License
Comment & Rating (0)