Lamy Z28 Converter Easy Flush/Fill Adapter (T15)

This is an adapter that lets you use a powered mini screwdriver with a Torx T15 or equivalent bit to speed up emptying, filling or flushing out your Z28 Converter equipped Lamy pens. May be compatible with other Lamy  converters or other universal converters that have a square finger twist section of approx. .2 in or 5 mm across the flats. 

This is designed to slide onto the finger twist section of the converter with just a bit of resistance to keep the adapter fixed in place. If the adapter is to tight or too loose, scale up or down by a few percent for better clearance. I tested this on multiple printers from multiple brands and everything worked fine with no tweaks needed, but your printer may be different. There are two different versions of this adapter one with the correct tolerance for PLA and one for PETG. 

PLEASE NOTE: The Z28 Converter uses a left hand thread and the controls on your mini screwdriver will be “reversed”. This means the forward button(clockwise rotation) will pull the plunger up and fill the converter with ink/cleaner and the back button(counter-clockwise rotation) will push the plunger down and empty the pen. Make sure to keep your pen pointed in a safe direction or appropriate container at all times to prevent any accidents that may cause a stain or spill.