Folding prop center hub fitting on 2205 motor

I designed an easy to print folding prop center hub to be used on 2205 drone motors.

I use it on my “Motte”  flying wing from https://3d-printz.at/.

To better align the blades with the fuselage i decided to give the blades a slight offside.
The hub fits on a BR2205 with 5mm shaft. The axles for the blades are 27mm apart. I can be used with standard 8mm blades.

The included spinner cap covers the motor and leaves some room for the stator and the cables.
I decided not to close it completely to get some cooling through.

I recommend using PETG or ABS for additional stability, since it has to hold the propeller blades.