Sprout Box

## 🌱 Stackable Sprout Grower: Efficient Space Utilization for Crispy Sprouts!

Do you wish for your own "mini garden" within limited desktop space? This **Stackable Sprout Growing Box** is designed for home cultivation, ensuring sprouts grow both vertically and robustly through its scientific structure.

### 🌟 Design Highlights

* **Vertical Weighted Lid**: The specially designed lid provides even downward pressure to growing sprouts. This is key to cultivating thick, plump sprouts and prevents them from growing too thin.
* **Separate Water Tray**: The independent bottom water tray easily collects excess water, keeping your desktop dry and tidy, and is convenient for pouring out at any time.
* **Excellent Drainage and Ventilation**: The bottom of the main body is covered with precisely designed honeycomb drainage holes, which ensure rapid drainage of excess water and provide good air circulation to prevent root rot.
* **Space Magician (Stackable Design)**: The bottom and opening of the box are precisely matched. You can print multiple units as needed and stack them upwards. Even in a small kitchen corner, you can "double your sprout yield".

### 🛠️ Structure Description

1. **Water Tray**: Supports the bottom and collects filtered water.
2. **Main Body**: The "bedroom" for sprout growth, with raised sidewalls to prevent light leakage.
3. **Weighted Lid**: Placed on top of the sprouts to simulate soil pressure and guide vertical growth.

### 📖 Growing Guide

1. **Soaking**: Soak mung beans or soybeans for 8-12 hours.
2. **Placing in Box**: Spread the soaked beans evenly on the bottom of the main body.
3. **Lidding**: Place the lid on top and put it in a cool, dark place.
4. **Watering**: Water once in the morning and once in the evening daily; water will flow through the holes into the water tray.
5. **Harvesting**: Once sprouts lift the lid, you can enjoy the joy of harvesting!

### 🖨️ Printing Suggestions

* **Material**: Recommended to use **PETG** (higher food safety level and moisture resistance) or PLA.
* **Supports**: Only the water tray requires supports in the model.
* **Infill**: The model uses 7% 3D honeycomb infill.

---

**Like this design? Feel free to download and upload photos of your prints, let's see how amazing your sprouts are!**