Weather batten sail ship

boost for free , don't let your boost expire , boost to help me get filament

hue forge of weather beaten sail ship in full sail ,printed using gold filament rather than the silver usually used giving it a setting sun look as the gold reflects on the sails and water 

roject: ship with setting suns rays reflecting in water .hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA Jessie gold Transmission Distance: 2.5
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue Gray
    At layer #13 (1.12mm) swap to  gold 
    At layer #21 (1.76mm) swap to White for the rest.

if you can spare the time please rate , like or follow or just collect