Coreattack

cover

shared image (3).jpg

shared image (2).jpg

shared image (1).jpg

shared image.jpg

plate_1.png

5f49dbbef52c11d4.jpg

Ich wollte maximale Quaität testen und in meinem Modell hatte ich noch ein Logo auf der Rückseite. Diese Einstellung ist sehr Zeitintensiv und benötigt viel Material durch die vielen Filamentwechsel. Wenn möglich druckt also gleich mehrere Modelle damit ist weniger Müll pro Modell habt.

I wanted to test maximum quality, and my model also had a logo on the back. This setting is very time-consuming and requires a lot of material due to the many filament changes. If possible, print several models at once to reduce waste per model.

SLOW - 0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

Schnellere Version des Modells. Leicht erhöhte Stabilität und weniger Müll, dafür aber mit leichter zu erkennenden Stufenbildung an den Diagonalen Streifen

Faster version of the model. Slightly increased stability and less waste, but with more easily visible stepping on the diagonal stripes

MEDIUM - 0.16mm layer, 2 walls, 15% infill

You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.

This user content is licensed under the MakerWorld Exclusive License.

LittleAnchun

Shanling M0S music player case

山灵 (Shanling) M0S音乐播放器外壳

Nachdem ich ein paar Designs von der M0 Hülle (M0s in meinem Fall) gedruckt habe habe ich dies als das bester empfunden. Großer dank geht an den originalen Ersteller dieses Modells. Mir fehlte allerdings ein bisschen persönliche Note, deswegen habe ich es angepasst und wollte die Ergebnisse der Community zurück geben. &nbsp;Schaut bitte gerne beim Modell des Erstellers vorbei da dieser noch ein paar Hinweise zu dem Modell in der Beschreibung hat.&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Das ist mein erstes Design, lasst mich wissen wenn es euch gefällt</boostcontent></boostme>

After printing a few designs of the M0 case (M0s in my case), I found this to be the best. Many thanks to the original creator of this model. However, I was missing a bit of a personal touch, so I modified it and wanted to give the results back to the community. &nbsp;Please also check out the creator's model, as they have some additional notes about the model in the description.&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>This is my first design, let me know if you like it</boostcontent></boostme>

Print Profile(2)

Description

Comment & Rating (2)

This remix is based on

License