Reptiles of the world - Hueforge - 2 colours

Reptiles of the world 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 1.36mm

    #000000 PLA Sunlu + 2.0 Black  Transmission Distance: 0.1
    #ffffff PLA Sunlu + 2.0 White  Transmission Distance: 6.8
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to White for the rest.