Tesla Model Y (Juniper) Rear Door Sill Protector

These were specifically designed to fit the 2026 Tesla Model Y (Juniper), however, I suspect they could be easily used on various other vehicles.  I have created two versions:

• Plate 1:  Original Size - Should be compatible without rescaling to work on most printers
• Plate 2:  Width 130% -  The max size which will comfortably fit on the P1/X1 print bed.  This is my personal preference, and the one I installed on my vehicle.

I used 3M's Automotive Super Strength Molding Tape ½-Inch x 15 ft (3614) to attach the protectors to the door sill.  They have been designed to evenly fit 4 solid strips along the length of the backside with minimal trimming.  For convenience, here's an Amazon link to the product I used:  https://amzn.to/3P339Bp 

Due Credit:  I was inspired by the work of Stephs 3D Lab's Tesla Model Y (Juniper) Rear Door Edge Protectors but I needed something that had more traction when dealing with wet shoes, so I created my own version from scratch.

Disclaimer:  I am not responsible for any damages incurred as a result of the use of this product to either person or property.  The user assumes all risk for use.

______________

If you would like to discuss commercial licensure or usage of this model, please reach out to me directly.  This model is solely provided free to use for personal use.