Bambu Lab Reusable Refill Spool - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

evilcabbages

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

P2S

P1P

H2D Pro

H2D

X1 Carbon

P1S

H2C

X1E

H2S

X2D

A2L

PLA, 0.2mm layer, 2 walls, 15% infill

Designer

4.9 h

2 plates

4.9(45)

PETG, 0.2mm layer, 2 walls, 15% infill

Designer

5.2 h

2 plates

5.0(13)

ABS, 0.2mm layer, 2 walls, 15% infill

Designer

5.1 h

2 plates

5.0(4)

Open in Bambu Studio

Boost

192

704

659

529

Released

Description

Dry the plastic on this spool only in a horizontal position (for example in a fruit dehydrator). Drying in a vertical position when exposed to 1 kg of plastic will most likely lead to deformation or print the spool from ABS or ASA.
The spool is not intended for vacuum packaging.
Not intended for use on side holder.
The use of a lock is mandatory.

I have added extra supports to the spool running outwards from the centre to the edges and filled 6 of the hexagons as well as added connectors between these.

These changes add a lot of rigidity and stiffness to the spool without adding much weight or filament use. This also adds to a new overall design.

The spool has a place for the Bambu Refill sticker, filament remaining meter and filament clip built into the edge. Markings on the filament remaining meter are approximate.

This remix is based on the model by VkvitV.

Comment & Rating (72)

@jaaviieerp

Print Profile

PLA, 0.2mm layer, 2 walls, 15% infill

perfect

@LammyLad

Print Profile

ABS, 0.2mm layer, 2 walls, 15% infill

Great print in Sunlu ABS

@user_2535024074

Boosted

what is the little tab that prints on the first plate for

Show original

@cryanosis

It's to lock the 2 spools together so they don't come apart during printing. If you look in the middle there's a slot for it

(Edited)

@sinterworks

Replying to @cryanosis :

can you point out in the image where the tab is supposed to fit? i can't figure it out either. the spool doesnt lock in place very well either. it is taking a lot of force for them to connect. i am using bambu refill.