Modifications supporting Yunying 20

Now supports original batteries and Yunying 20

Requires one BT2.0 male connector, two 18 AWG silicone wires, four M2 knurled nuts, five M2*25 screws

It is recommended to print the ducts and body with CF material. The canopy can be PLA, PETG, or TPU

This is a modification that supports Betafpv Yunying 16. Of course, other 1102 motors can also be used

Have you also encountered situations where the original power is too weak and the battery voltage drop is too large

This frame can solve your problem

It uses the same 2.2-inch propellers as the Pavo20 Pro, and the size is also the same as the Pavo20 Pro. Even the structure is almost identical. It has a very simple structure with only 5 M2*20 screws besides the motors

You can reuse the Yunying 16's motors, flight controller, and VTX

For the battery, I use Betafpv's 680mAh 95C Lava II battery. Lava is also an option

Boost Me (Free)

Shouldn't such a great model get a boost

I feel this frame is quite crash-resistant. The ducts can be PETG CF or PA6 CF

Don't worry, this 18000kv motor with 2.2-inch propellers will not burn out