Customizable Decorative D6 Dice - No AMS
Print Profile(2)
Description
A large decorative D6 dice designed to be both fun to customize and practical to print.
This model lets you create anything from a classic oversized dice to a cleaner, more graphic version with square pips and flatter faces. It is designed as a No-AMS-friendly design, with the body and pips printed separately, so you can get a clean multi-color result without needing a multi-material printer.
The model was developed with printability in mind. The shape, pip system, and insert design are all made to work well as a large decorative print without the need for supports.
Boost Me (for free)
If you print one and enjoy it, I’d be very grateful for a boost. It really helps support future models and updates.
Customization options
| Option | Description |
|---|---|
| dice_size | Size of the dice |
| edge_rounding_ratio | Controls how soft or sharp the edges and corners are |
| face_clip_ratio | Makes the faces flatter and changes how early the rounding begins |
| pip_shape | Choose between round and square pips |
| pip_size_ratio | Controls pip size |
| pip_spacing_ratio | Controls the spacing between pips |
| pocket_depth_ratio | Controls how deep the pip pockets are |
| insert_height_ratio | Controls insert height |
| fit_mode | Preset fit between body and inserts: tight, normal, or loose |
| die_color | Body color |
| pip_color | Pip color |
| advanced_mode | Enables manual fine tuning of tolerances and pip geometry |
Good starting points
- Want a rounder, softer dice? Increase edge_rounding_ratio
- Want flatter faces and better printability? Increase face_clip_ratio
- Want bigger, bolder pips? Increase pip_size_ratio
- Want more spacing between pips? Increase pip_spacing_ratio
- Want easier assembly? Use loose fit
- Want a tighter fit? Use tight fit
Printing notes
- Designed to print without support
- Body and pips are printed separately
- Inserts are intended to be glued in place - but can also be press-fitted using tight fit mode
- Great for large decorative prints
- A fit test is recommended before very doing large prints
If you make one, I’d love to see your version.
License
Comment & Rating (3)