Pooh Bear polymer clay cutter
Print Profile(1)
Description
Pooh Bear polymer clay cutter with a sharp edge, available in 35mm
I have only tested on Bambu labs and have only use a 0.4mm nozzle, which produces great results. Arachne must be selected.
Tips
- Roll clay to 2.5mm or thicker for a clean impression
- If clay is sticking, use cornstarch (or water seems to work well) and also do the double press method - press lightly and lift, then press again.
Print settings
0.4 Nozzle
0.16mm layer
2 walls
15% infill but for best results I do often print with 100% infill
Wall generator 'Arachne'
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)