Stackable Shoe Rack Bunnings Version

This remix is for Aussies who will likely use Bunnings sourced shelving.
"Flexi Storage Home Solutions 16x200 Shelf" will fit this perfectly (as that is what I remixed it for).
They are available in 600, 900, 1200mm lengths.
The actual product dimensions I found were a tiny bit different than advertised (15x201mm).
So the printed gap is 15.5x201.5mm for a snug fit.

The original was 9 walls and 5% infill.
I went with 5 walls and 3% infill to save filament and time. Plenty rigid to hold some shoes.
If you dont like the honeycomb, it looks good with 5% Cubic infill, and will also likely be a little more solid.
I have made presets for both.

5 Wall Loops

3% Sparse Infill - Honeycomb

0 Top Shell Layers

0 Bottom Shell Layers

90* Infill Direction

Obviously you can use whatever infill and wall settings you want.

Printed on P1S:

0.4mm Nozzle

0.2mm Layer Height

FILAMENT COST - 130-150g
PRINT TIME - 3H
PLA/PETG