Cover Plates NextLevel StandingTripleMonitor Stand

These cover plates are designed for the Next Level Racing Free Standing Triple Monitor Stand. 
https://nextlevelracing.com/products/next-level-racing-free-standing-triple-monitor-stand/

On my setup, the original mounting brackets extend above the top edge of the screens (I have 3x34-inch monitors), which leaves the mounting holes visible. 
To create a cleaner look, I designed these small plates that stick over the exposed metal using double‑sided tape.

There are two types of plates included:

• 6 plates for the monitor mounting brackets, each measuring 36 × 100.6 × 1.5 mm.
• 3 plates for the vertical posts, each measuring 100.6 × 100.6 × 2 mm. (if need you can print 6 plates for top & bottom)

The parts are sized to hide the visible holes without interfering with the monitors or VESA mounts. 
Simply print the required number of covers, apply double‑sided tape on the back, and press them onto the bracket above each screen. 
No drilling or additional hardware is needed, and you can remove them later without damaging the stand.

These plates can also be useful as a mounting surface for lightweight speakers, as long as the speakers are securely attached to the underlying metal mount and not only to the printed cover. 
Always check that the total weight and mounting method are safe before use.