Search models, users, collections, and posts
Fog Horn / Stadium Diaphone SUPER LOUD!!!
Print Profile(2)
Vase mode, 0.24mm layer, 1 walls, 0% infill
Designer
5.4 h
3 plates
Valve Assembly, 0.2mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
Open in Bambu Studio
Boost
1285
3449
149
40
1.6 k
976
Released
Description
SUPER LOUD!!! Fog Horn Sound
Horn printed in 3 connecting parts using vase mode(these need to be printed separately).
The valve/mouth piece is printed using the Valve profile.
No extra parts needed, everything is 3D printed including valve and horn trumpet pieces.
I have incorporated a threaded cap to retain the valve insert, this can also allow the horn to be tuned.
The horns are a push in fit and don't require any glue.
Notes:- PLEASE READ BEFORE PRINTING AND ASSEMBLY
Please don't over tighten the cap as this will close of the valve.
Insert the horn pieces gently to avoid cracking the outer tube.
The horns are printed using vase mode so will have to be printed individually.
Take care when removing the valve insert from the build plate as they are fragile.(only 1 layer thick)
I have had the most success printing the valve on a smooth build plate.
Test and tune the horn before final assembly onto the horn trumpet.
I have found the best way to tune is to leave the cap loose and while blowing into the individual horn, slowly tighten the cap until a satisfactory note is heard.
I hope you have as much fun with your Fog Horn as I did creating and designing it.
Don't forget to Like, Follow and Boost, It really helps.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (149)