Rock Face RC Mini Crawler Diorama

• This is a diorama that can be hung on the wall in art frame size and can be used as a course for 1/24 to 1/30 scale radio-controlled mini crawlers.(SCX24, SCX30, FCX24, MINI-Z 4x4, etc.)
• Please refer to the reference video and stl data of "rc_rock_assembly_reference" for production.

Reference Video:

Key Features:

• Part division that allows 3D printing even on small sizes such as the A1 mini.
• The parts are divided so that they look natural even when assembled after finishing such as painting.

3D Printing & Settings Reference: 
This model is symmetrical, so the number of pieces to print is as follows.

• For the 3mf file, 3D print two of each of plates 1 to 3.
• For STL data, 3D print two of each of "rc-rock-parts-1", "rc-rock-parts-2", and "rc-rock-parts-3".
• layer height: 0.25 mm
• infill: 10%
•  

Tip:

• Enjoy creating your own unique diorama using the Slicer's fuzzy skin mode, 3D printing with rock-style filament, or using the paint methods listed below.
• I'm worried about the texture of the mountain part as it is output by a 3D printer, so I mixed water-based paint with baby powder whose main component is talc to make the surface matte and uneven.
• The gravel part is strongly bonded by diluting the woodworking bond with water.