Shoe & Neoprene Boot Dryer (Noctua NF-A20)

This model is a dryer for neoprene boots, hiking boots, and sneakers, specifically designed for use with the Noctua NF-A20 PWM fan. It is an adaptation of the 80mm PC Fan Shoe Dryer by @A_S_S, scaled and modified to fit the larger 200mm fan.

Required Hardware

• Fan: 1x Noctua NF-A20 PWM
• Inserts: 4x M4 Ruthex (or similar) heat-set inserts
• Screws: M4x40mm (4 screws recommended; 2 might be sufficient for basic stability).

Print Settings

• Material: Basic PLA
• Supports: Necessary (especially for the curved ends of the tubes).
• Feet Design: The provided feet have a tight fit. They also include space for M4 Ruthex heat-set inserts, allowing you to screw on additional or alternative feet (e.g., printed in TPU) if needed.

Usage Notes

• Airflow: If the dryer is placed on a flat surface, the use of the feet is recommended to ensure sufficient air intake.
• Compatibility: Dimensions are optimized for neoprene boots, hiking boots, and standard athletic shoes.