Elegant soap dish with flowers - Costumizable!

Elegant & fully customizable soap dishes

Create your own perfect combination with 5 different drip trays to choose from.

The original base has flower details, as shown on my images. However, I’ve also included a minimalistic version in the print profile, without flower details :-)

The full set (dish + tray) prints in just 2.5 hours and uses only 55g of filament in total.

Simply pick your favorite combination from the pictures and print the matching plate(s) :-)

If you loved this model, you can checkout my other matching models in this collection:

https://makerworld.com/collections/21657980

If you’d like the dish and tray in different colors but still want to print them on the same plate, remember to switch to Print by Object to save both time and filament.
You’ll find this under: Global → Others → Print Sequence

Print Settings

Drip trays

• 0.2 mm layer height
• 15% infill
• 3 walls
• Top surface ironing enabled

Dish / Base

• 0.16 mm layer height
• 15% infill
• 2 walls

No supports are needed for the minimalistic base.
The flower version requires very minimal support (0.8g) to support a few bottom leaves - this does not affect the final print quality.

Optional Tip

There are 4 small indents underneath the base for rubber feet/silicone pads.
If you have some, I highly recommend using them. They provide stronger grip and add a slight lift to the base, creating a more luxurious “floating” look.

Filament Used

• Elegoo Matte PLA (Beige)
• Jayo Silk PLA (White)
• 3DSaga Wood PLA (Cherry)
• Elegoo Matte PLA (White)

All feedback, ideas and requests are very welcome!