Fuji Mount - Block Notes Covers

I made this reusable notebook covers to give some life to my little A6/A5 notebook. 

These covers are designed to last and can be used again and again.

- - - - - - -

Here you can find all my other reusable notebook covers:   https://makerworld.com/it/collections/6366016-blocknotes-cover

- - - - - - -

This is suitable for A6 notebooks with a spiral on the top side with 20 holes (100x150mm).

(My block is an Italian "Ariston - A6- by Blasetti S.p.a.")

This is suitable for A5 notebooks with a spiral on the left side with 23 square holes (150x205mm).

(My block is an Italian "BM90 - A5- by Arti Grafiche BM S.r.l.")

The holes are made as negative parts. So you can divide by objects and vary the number and position of the holes as you like, so as to adapt the cover to your notebook.
You can also vary the size of X and Y if you want, but keep the size of Z exactly the same! (otherwise the colors will not work as well.)

There is also a Blank cover to the back, which works great with Pattern Build Plates!

- - - - - - -

Remember:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Start with black

At layer #8 (0.72mm) swap to gray

At layer #11 (0,96mm) swap to white

At layer #16 (1.36mm) swap to pink for the rest

- - - - - - -

^_^