The Peak Station

The Peak Station – The next adventure awaits!

The impressive Playmobil Peak Station Weather Station (53.9 x 56.3 x 47.9 cm) marks the beginning of a new chapter full of discoveries, technology, and fun!

The detailed building extends over two levels and is surrounded by massive rocks – perfect for exciting missions at lofty heights.

• On the ground floor is a garage with a sectional door, which fits the newly designed car perfectly.
• Small mini lights can be attached inside and outside to create a particularly atmospheric ambience. The LED set from MakerWorld can be purchased for this purpose.
• Upstairs, the control center awaits with many small, lovingly crafted details – this is where the weather is monitored around the clock.
• Outside on the rocks sits the striking radar tower, which gives Peak Station its unmistakable look.

Practical note:

• The base plates have various markings, which are explained in detail in the instructions.
• The set consists of three parts:
  • Ground Set
  • Top Set
  • Car Set

The Ground Set and Top Set must be printed. Don't forget to download both sets!

• For those who want to save filament, there is an alternative staircase version without rocks.
• The set also includes several multicolor prints.
• At least 140 original yellow System X pins from Playmobil are required for assembly.
• If these are missing, you can print suitable replacement pins yourself using the included 3D print file – you will find this in the basic set.
• If you prefer gluing to sticking, the file also contains special adhesive pins.
• Detailed instructions with all the building steps are of course included.
• The instructions also specify exactly which parts need to be glued.

I wish you lots of fun putting it together.

Note: The name is only used to identify and describe the model and is not intended to infringe any property rights or trademark rights. These are not original Playmobil parts - they only serve as spare parts or extensions.

The Peak Station – The next adventure awaits!

With the impressive Playmobil Peak Station Weather Station (53.9 x 56.3 x 47.9 cm) a new chapter full of discoveries, technology, and fun begins!

The detailed building extends over two levels and is surrounded by massive rocks – perfect for exciting missions at lofty heights.

• On the ground floor is a garage with a sectional door, which fits the newly designed car perfectly.
• Small mini lights can be attached inside and outside to create a particularly atmospheric ambience. The LED set from MakerWorld can be purchased for this purpose.
• Upstairs, the control center awaits with many small, lovingly crafted details – this is where the weather is monitored around the clock.
• Outside on the rocks sits the striking radar tower, which gives Peak Station its unmistakable look.

Practical note

• The base plates have various markings, which are explained in detail in the instructions.
• The set consists of three parts:
  • Ground Set
  • Top Set
  • Car Set

The Ground Set and Top Set must be printed. Don't forget to download both sets!

• For those who want to save filament, there is an alternative staircase version without rocks.
• The set also includes several multicolor prints.
• At least 140 original yellow System X pins from Playmobil are required for assembly.
• If these are missing, you can print suitable replacement pins yourself using the included 3D print file – you will find this in the basic set.
• If you prefer gluing to sticking, the file also contains special adhesive pins.
• Detailed instructions with all the building steps are of course included.
• The instructions also specify exactly which parts need to be glued.

I wish you lots of fun putting it together.

Note: The name is only used to identify and describe the model and is not intended to infringe any property rights or trademark rights. These are not original Playmobil parts - they only serve as spare parts or extensions.